PEC Annual Report Abstracts on Actuation
On this page:
2003
2002
2001
2000
1999
1998
1997
1996
1995
1994
2003 PEC Annual Report
Development of High-Speed, Low Amplitude Fast Tool Servo
by N. Buescher and T.A. Dow
2002 PEC Annual Report
Design and Development of a Drop Dispenser
by E. Chatham and T.A. Dow
Analysis on Dynamic Performance of Piezoelectric Bimorph Cantilevers
by T. Wu and P.I. Ro
2001 PEC Annual Report
Design of a Linear High Precision Ultrasonic Piezoelectric Motor
by M.G. Bauer and T.A. Dow
Development of Miniature Actuator for Cryogenic Applications
by M.D. Heinrich and T.A. Dow
2000 PEC Annual Report
Design of a Linear High Precision Ultrasonic Piezoelectric Motor
by M.G. Bauer and T.A. Dow
Development of a Piezo Actuator for Cryogenic Environments
by M.D. Heinrich and T.A. Dow
Design of Ultrasonic Flexural Wave Resonator Structures Using Finite Element Method
by T. Wu and P.I. Ro
Ultrasonic Acoustic Streaming Cooling Effect
by Q. Wan and A.V. Kuznetsov
1999 PEC Annual Report
Design of a Linear High Precision Ultrasonic Piezoelectric Motor
by M. Bauer and T. Dow
Development of a Piezo Actuator for Cryogenic Environments
by M. Heinrich and T. Dow
1998 PEC Annual Report
Design of a Linear High Precision Ultrasonic Piezoelectric Motor
by M. Bauer and T. Dow
Development of a Nanometer Resolution Constant Velocity Piezotranslator
by J. Fasick and T. Dow
1997 PEC Annual Report
Design of a Precision X-Y Microstage with a Maneuverable Kinematic Coupling Mechanism
by A. Carrano, E. Decrescenzo and J. Taylor
Development of a Nanometer Resolution Constant Velocity Piezotranslator
by J. Fasick and T. Dow
Fabrication of Non-Rotationally Symmetric Surfaces Using a Magnetically Levitated Fast-Tool Servo
by H. Gutierrez, B. Stancil, P. Ro and T. Dow
Redesign of the Constant Velocity Piezotranslator
by P. van Putten, J. Fasick and T. Dow
1996 PEC Annual Report
Robust Parametric Design of a Precision X-Y Microstage with a Maneuverable Kinematic Coupling Mechanism
by A. Carrano, E. Decrescenzo, R. Warner and J. Taylor
Design of a Constant Velocity Piezotranslator
by J. Fasick, A. Ruxton and T. Dow
Nonlinear Control of a Magnetically Levitated Fast Tool Servo System
by H. Gutierrez and P. Ro
Testing of MEMS Style Artillery Shell Fuses
by G. Moorefield, II and D. Griffis
1995 PEC Annual Report
Closed Loop Control of a Magnetic Servo-Levitated Fast Tool Servo System
by H. Gutierrez and P. Ro
Design of a Constant Velocity Piezotranslator
by A. Ruxton, T. Dow, D. Youden and K. Falter
Design of a Long Range Fast Tool Servo System Using Electromagnetic Forces
by B. Stancil and P. Ro
1994 PEC Annual Report
Compensation of Non-Linear Effects in Ball Screw Actuators
by J. Cuttino and T. Dow
Dynamics of a Magnetic Servo-Levitated Fast-Tool Servo System
by H. Gutierrez and P. Ro
Design of a Fast Tool Servo System Using Magnetic Servo Levitation
by B. Stancil, P. Ro and G. Moorefield, II
Faculty & Staff
|
Students
|
Research
|
Affiliates
|
Resources
|
Publications
Precision Engineering Center
Box 7918
1001 Capability Drive, Research Bldg. I
North Carolina State University, Raleigh, NC 27695
Phone (919) 515-3096, Fax (919) 515-3964
For information, send e-mail to
Thomas Dow (thomas_dow@ncsu.edu)
.
NCSU's Home Page