Abstracts on Control

	PEC Annual Report Abstracts on Control
On this page: 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994	2003 PEC Annual Report Error Compensation Using Inverse Actuator Dynamics by W. Panusittikorn, K. Garrard and T.A. Dow 2002 PEC Annual Report Closed Loop Force Feedback Control of Miniature Ball End Milling by D. Hood and G. Buckner Surface Decomposition for Diamond Turning by W. Panusittikorn and K. Garrard, and T.A. Dow Modeling and Control of a Magnetostrictive Tool Servo System by W. Panusittikorn and P.I. Ro 2001 PEC Annual Report Modeling and Control of a Magnetostrictive Tool Servo System by W. Panusittikorn and P.I. Ro Piezoelectric Resonating Structures for Microelectronic Cooling by T. Wu and P.I. Ro Active Control of Tool Deflection and Chatter during Precision Milling Operations using Magnetic Bearing Spindles by S. Clayton, D. Hood, T.A. Dow and G. Buckner 2000 PEC Annual Report Acoustic Streaming Induced by Ultrasonic Flexural Vibrations and Associated Enhancement of Convective Heat Transfer by B.G. Loh and P.I. Roh Modeling and Sliding Mode Control of Friction-Based Object Transport using Two-Mode Utlrasonic Excitation by W. Panusittikorn, M.C. Lee and P.I. Ro 1999 PEC Annual Report Feasibility of Using Ultrasonic Flexural Waves as a Cooling Mechanism by B. Loh and P. Ro Compensation of Microdynamic Friction by Sliding Mode Control with Variable Switching Gain by W. Shim and P. Ro 1998 PEC Annual Report A Research Controller for the Nanoform 600 by K. Garrard, A. Sohn and P. Ro Feasibility of Using Vibrational Traveling Waves for Industrial Material Handling by J. Santiago, B. Loh and P. Ro Robust Friction Compensation for Submicrometer Positioning and Tracking for a Ball-Screw Driven Slide System by W. Shim and P. Ro 1997 PEC Annual Report A Research Controller for the Nanoform 600 by K. Garrard and A. Sohn Modeling and Compensation of Friction in Precision Positioning Servo Systems by W. Shim and P. Ro 1996 PEC Annual Report A Research Controller for the Nanoform 600 by K. Garrard Active Damping of a Ball Screw Slide Using a Piezoelectric Drive by C. Haeuber and P. Ro 1995 PEC Annual Report Interfacing the Aerotech U31 Controller to the Nanoform 600 DTM by K. Garrard and G. Moorefield, II Active Damping of a Ball-Screw Slide Using a Piezoelectric drive by C. Haeuber and P. Ro 1994 PEC Annual Report A PC Controlled Fast Tool Servo by K. Garrard and K. Falter Active Damping of A Ball-Screw Slide Using a Piezo-Electric Drive by C. Haeuber and P. Ro
	Faculty & Staff \| Students \| Research \| Affiliates \| Resources \| Publications
Precision Engineering Center Box 7918 1001 Capability Drive, Research Bldg. I North Carolina State University, Raleigh, NC 27695 Phone (919) 515-3096, Fax (919) 515-3964 For information, send e-mail to Thomas Dow (thomas_dow@ncsu.edu). NCSU's Home Page