PEC Annual Report Abstracts on Fabrication

On this page:

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

2003 PEC Annual Report

• Feedback Control of Tool Deflection in Miniature Ball End Milling by D. Hood and G. Buckner
• Force Feedback Tool Deflection Compensation of Miniature Ball End Mills by K. Freitag, T.A. Dow, G. Buckner and R. Scattergood
• Capabilities of Micro-Machining by B. Brocato and T.A. Dow
• Fixturing and Alignment of Free-Form Optics for Diamond Turning by A. Sohn, K. Garrard and T.A. Dow
• Elliptical Vibration Assisted Diamond Turning by N. Negishi and T.A. Dow

2002 PEC Annual Report

• High Speed Vibration Assisted Machining by N. Negishi and T.A. Dow
• Force Modeling with Miniature Ball End Mills by S. Clayton and T.A. Dow
• Co-Molding Plastic Optics by D.D. Gill and T.A. Dow
• Off-Axis Biconic Mirror Fabrication by K. Garrard and A. Sohn
• Characterization of Mechanical Indent Effects on Polystyrene Hemispheres by P. Morrissey and J. Eischen

2001 PEC Annual Report

• Precision Replication of Meso and Micro Optics through Injection Molding by D.D. Gill and T.A. Dow
• Rapid Diamond Milling by N. Negishi and T.A. Dow
• Off-Axis Biconic Mirror Fabrication by A. Sohn and K. Garrard
• Laser Scribing for use as a Precision Shaping Technique by B. Love and J. Eischen

2000 PEC Annual Report

• Tool Deflection Compensation by E.L. Miller and T.A. Dow
• Precision Replication of Optics by D.D. Gill and T.A. Dow
• Vibration Assisted Machining (VAM): Elliptical Diamond Milling by M.A. Cerniway and T.A. Dow

1999 PEC Annual Report

• Precision Replication of Optics by D. Gill and T. Dow
• Deflection of Miniature Milling Tools by E. Miller, T. Dow, A. Sohn and K. Garrard
• Removal of Form Error in Replicated Optics by A. Sohn and T. Dow
• A Y-Axis for the Nanoform 600 DTM by A. Sohn and K. Garrard

1998 PEC Annual Report

• Chip Dynamics in Diamond Turning by B. Jared and T. Dow
• Deflection of Miniature Milling Tools by E. Miller, A. Sohn and T. Dow
• Tool Wear and Tool Forces in High Speed Machining of Aluminum by P. Minor, T. Dow and A. Sohn
• Development of Grinding Models for Brittle Materials by K. Sharp and R. Scattergood
• Fabrication of Non-Imaging Optical Surfaces by A. Sohn, K. Garrard and T. Dow

1997 PEC Annual Report

• Chip Dynamics in Diamond Turning by B. Jared and T. Dow
• Tool Wear in High Speed Machining by P. Minor, T. Dow and R. Scattergood
• Fabrication of Non-Imaging Optical Surfaces by D. Oyewole, K. Garrard, A. Sohn, T. Dow and H. Hallen
• Development of Grinding Models for Brittle Materials by K. Sharp and R. Scattergood
• Detection of Machining Tool Chatter During High Speed Machining by B. Skolnick and R. Keltie

1996 PEC Annual Report

• The Design and Documentation of a Fast Tool Servomechanism for the Production of Inertial Confinement Fusion Targets by B. Jared and T. Dow
• Chip Dynamics in Diamond Turning by B. Jared and T. Dow
• The Role of Tool Wear in High Speed Machining by P. Minor and T. Dow
• Development of Grinding Models for Brittle Materials by K. Sharp and R. Scattergood
• Chatter Detection in High Speed Machining of Aluminum by B. Skolnick and R. Keltie
• Phase Transformations During Microcutting Tests on Silicon by B. Tanikella and R. Scattergood

1995 PEC Annual Report

• Elastic Components of Deformation and Tool Force in Metal Machining by C. Arcona and T. Dow
• The Design and Documentation of a Fast Tool Servomechanism for the Production of Inertial Confinement Fusion Targets by B. Jared and T. Dow
• High Speed Machining Testbed by G. Moorefield, II and T. Dow
• Electrolytic In-Process Dressing by K. Sharp and R. Scattergood
• Control of Fracture and Damage in Precision Contour Grinding by G. Storz and T. Dow
• Process Models for the Precision Grinding of Brittle Materials by B. Tanikella and R. Scattergood

1994 PEC Annual Report

• Development of a Tool Force/Surface Finish Model for Diamond Turning by C. Arcona and T. Dow
• Interface to the Cup Wheel Grinding Computer Model by J. Feinberg and R. Fornaro
• Influence of Grinding Wheel Properties in Precision Grinding by M. Miller and T. Dow
• Generation of Rotationally Asymmetric Optical Surfaces Using a Fast Tool Servo by G. Moorefield II, K. Garrard, L. Taylor, K. Falter and T. Dow
• A Tool Force Dynamometer for Production Diamond Turning by G. Moorefield II, K. Falter, C. Arcona and T. Dow
• In-Process Dressing of Grinding Wheels for Brittle Materials by K. Sharp and R. Scattergood
• Cup Wheel Grinding Geometry by G. Storz and T. Dow
• Process Models for Precision Grinding of Advanced Ceramics and Glass by B. Tanikella and R. Scattergood